Restore Your Karcher Pressure Washer’s Power: High-Quality Replacement Capacitors
Is your Karcher pressure washer making a buzzing or humming noise when you try to switch it on, but nothing else happens? This frustrating issue is more common than you might think, and the good news is — it’s usually not a motor failure. In most cases, the buzzing sound points directly to a faulty motor start capacitor.
Already know your capacitor part number? Jump to the which capacitor fits my Kärcher chart or straight to our Karcher capacitors ↓
📋 Which Capacitor Fits My Kärcher?
Use this chart as a starting point. Several capacitors fit the same series (for example, a K4 can use 25, 30 or 35µF depending on its age), so always match the µF value and part number printed on your old capacitor. The new capacitor must have the same µF and the same or higher voltage (most Kärcher capacitors are 450V).
| Your Kärcher | Capacitor | Part number | |
|---|---|---|---|
| K2, KB | 12µF | 66612340 | View & buy |
| K2, K3, KB (e.g. K2.97, K2.99, K3.97, K3.99) | 16µF | 90850350 | View & buy |
| K3, K4, K5, K6, K8, KB | 25µF | 90850130 | View & buy |
| K3, K4, K5, K6, K7, KB, HD | 25µF | 66611290 | View & buy |
| K6, K7 | 25µF | 66613010 | View & buy |
| K3, K4, K5 | 30µF | 90850770 | View & buy |
| K3, K4, K5 | 32µF | 90850950 (9.085-095.0) | View & buy |
| K3, K4, K5 | 35µF | 90850860 | View & buy |
| K6, K7 | 40µF | 66612880 | View & buy |
| K7 | 40µF | 66501090 / 90026140 | View & buy |
| Check the label on your old capacitor | 18µF | 90850580 | View & buy |
| Check the label on your old capacitor | 20µF | 90850230 | View & buy |
| K5, K6, K7, K7xx (e.g. K 6.40, K 7.20, K 720), PRO HD | 40µF | 66612980 (replaces 6.661-158.0) | View & buy |
Can’t read the label or your model isn’t listed? Send us a photo of your old capacitor and the rating plate on your washer and we’ll tell you which one you need.
⚠️ What Does the Buzzing Noise Mean?
When you hear a buzzing or humming sound but the motor doesn’t turn over, it typically means that the power is reaching the motor, but the motor doesn’t have enough torque to start. This is a classic sign of a defective or worn-out capacitor. Instead of replacing the entire unit or paying for expensive repairs, you can often fix the problem by replacing the capacitor — a fast and affordable solution.
🔍 What Is a Capacitor and Why Does It Matter?
The capacitor is a small cylindrical component usually mounted on or near the motor. Its job is to provide the initial burst of energy needed to start the electric motor. Without it, the motor just hums in place — unable to start spinning. Capacitors can fail due to age, moisture, temperature changes, or long periods of disuse, especially during winter storage.
🛠️ Symptoms of a Faulty Karcher Pressure Washer Capacitor
- Washer hums or buzzes when switched on but doesn’t start
- Motor attempts to start but quickly stalls
- You smell electrical heating or hear a faint “click” without activation
- Sometimes starts if you manually turn the fan (not recommended)
If you notice any of these symptoms, it’s very likely the capacitor needs replacing. Capacitors are generally inexpensive and very easy to replace — even with basic DIY knowledge.
💡 Why Buy Capacitors from Doctor Spares?
At Doctor Spares, we specialise in genuine and high-quality compatible parts for Karcher pressure washers. Our capacitors are:
- High-Quality and Durable: Built to meet or exceed OEM specifications for reliability
- Compatible with Multiple Karcher Models: Including popular models like K2, K3, K4, K5, and K7
- Available in Various Sizes: Including 12µF, 16µF, 20µF, 25µF, 32µF, 35µF, 40µF, and more
- With or Without Cable: Choose the style that matches your machine
- Quick to Fit: Simple installation process for most models
🧾 How to Find the Right Capacitor for Your Washer
To identify the correct replacement:
- Locate the label on your existing capacitor (check µF and voltage rating)
- Find your model number (usually printed on the body or base of your washer)
- Use our product listings or search bar to match the correct part number
If you’re unsure, our customer service team is ready to assist you — just send us a message and we’ll help find the right match for your unit.
🚚 Fast Shipping, Trusted UK Supplier
We ship quickly throughout the UK, so you can get your pressure washer back in action without delays. We’ve helped thousands of customers get their equipment working again, and we’re confident we can help you too.
⭐ Customer Satisfaction Guaranteed
All of our products are backed by a no-hassle return policy. If the capacitor you purchase isn’t the right fit, we’ll help you find an alternative or offer a refund. Your satisfaction is our priority.
🔌 How to Test a Kärcher Pressure Washer Capacitor
Safety first: unplug the pressure washer and leave it for a few minutes. A capacitor can hold a charge, so discharge it across its terminals with an insulated screwdriver before touching it.
- Look at it. A capacitor that is bulging, cracked, leaking or scorched has failed and needs replacing.
- Measure it. Set a multimeter to capacitance (µF) and connect it across the two terminals. A reading more than about 5–10% below the value printed on the capacitor means it is weak and should be replaced.
- No meter? If the washer hums but won’t start, and starts when the pump is helped to turn, the capacitor is almost always the cause.
🔧 How to Replace the Capacitor
- Unplug the machine and remove the cover screws to reach the motor (on most K2–K5 models the capacitor sits next to the motor under the main housing).
- Take a photo of the wiring before you disconnect anything.
- Discharge the old capacitor, then unclip it and disconnect the two wires (or cut the leads close to the old capacitor on cable-lead versions).
- Fit the new capacitor in the same position and connect the wires exactly as before. Capacitors are not polarised, so either wire can go to either terminal.
- Refit the cover and test. The motor should start straight away without humming.
If the new capacitor doesn’t cure the humming, the pump may be seized (often after frost or long storage), or the motor may have a fault. In that case it’s worth getting the machine checked.
⚙️ How Does a Run Capacitor Work?
A single-phase motor can’t start turning on its own. The capacitor creates a second, slightly delayed supply to the motor’s start winding, which gives the motor the “push” it needs to start and keeps it running smoothly. When the capacitor weakens, the motor gets power but not that push, so it just hums or buzzes. That’s why a cheap capacitor so often brings a “dead” pressure washer back to life.
❓ Kärcher Capacitor FAQ
Can I use a capacitor with a higher voltage?
Yes. The µF must match, but the voltage can be the same or higher.
Can I use a different µF value?
No. A different µF value can make the motor overheat or fail to start. Always match the µF.
Are these genuine Kärcher parts?
Yes, the capacitors listed above are genuine Kärcher parts, sent from stock with fast tracked UK delivery.
Do I need cable leads or tag connectors?
Match your old capacitor. Each listing shows a photo of the connection type.
🛒 Genuine Karcher Capacitors – In Stock Now
These are our most popular Karcher replacement capacitors. Check the part number and uF value printed on your old capacitor, then pick the matching one below.
All Karcher Capacitors by Part Number
- Karcher 66612340 – 12uF capacitor (steam cleaner) – £12.99
- Karcher 90850350 – 16uF capacitor – £19.99
- Karcher 90850580 – 18uF capacitor – £19.99
- Karcher 90850230 – 20uF capacitor – £19.99
- Karcher 66611290 – 25uF capacitor – £19.99
- Karcher 90850130 – 25uF capacitor (K3, K4, K5) – £9.99
- Karcher 66613010 – 25uF capacitor (K6) – £19.99
- Karcher 90850770 – 30uF capacitor – £19.99
- Karcher 9085095 – 32uF capacitor – £19.99
- Karcher 90850860 – 35uF capacitor – £19.99
- Karcher 66501090 / 90026140 – 40uF capacitor – £19.99
- Karcher 66612880 – 40uF capacitor (K6, K7) – £19.99
- Karcher 66612980 – 40uF capacitor – £15.99
Tip: Always unplug your pressure washer before opening it. Match both the part number and the uF value of your old capacitor. Can’t read it? Contact us with your washer model and we’ll find the right one.
📈 Stop the Buzzing — Fix Your Pressure Washer Today
There’s no need to replace your entire pressure washer or spend a fortune on repairs. A simple capacitor replacement can restore your machine and save you time and money.
👉 Browse our full selection of Karcher pressure washer capacitors
Still not sure if the capacitor is really the problem? See how to test a Kärcher capacitor below.
We carry part numbers including 6.661-158.0, 6.661-288.0, 9.085-013.0, 90850130 and many others. Whether you need 25µF, 40µF, or a compact style with a mounting bolt or cable, we’ve got the right fit.
📦 Order Today and Get Back to Cleaning Tomorrow
- Fast UK Shipping
- Quality Assured Components
- Friendly Customer Support
- Trusted by Hundreds of DIYers and Professionals
Don’t let a small part cause a big problem. Replace your Karcher pressure washer capacitor today and enjoy powerful, reliable cleaning once again.






